Realize the large-scale network interconnection of the enterprise's total department.

1. Background

With the continuous expansion of the company's development scale, in order to improve office efficiency and enterprise management level, it is often necessary to build various project management system software (such as OA, financial system, ERP, etc.) for operation and management. However, since the company's branches are located in different regions and most of them do not have real public network IP, the interconnection between the headquarters and various branches often needs to be realized by third-party software, and the headquarters has too many network rules, the network is more complex, deployment and maintenance has become a problem.

2. Implementation Difficulties

1. The total branch is located in different regions and has different broadband networks;
2. Traditional networking solutions need to borrow third-party software to achieve;
3. Environmental restrictions cannot change the original network structure of the two places;
4. The deployment and maintenance are difficult, and the security and stability are not guaranteed.
   

3. The Solution

Aweseed router is an intelligent networking router independently developed by Aweray, which can realize the network interconnection between the two places of the company without changing the original network structure.
Connect Aweseed routers under the primary routing of the headquarters and branches, and with the Aweseed bypass setting function, the devices at both ends can communicate with each other. Let's take a look at the detailed operation steps below.

4. OPERATING STEPS

4.1 create intelligent networking

[Click to view intelligent networkingTutorial]

4.4 setting bypass route

After the network is created, select [Remote Networking]-[Settings]-[Bypass Setting] and click "Add Bypass".

To add a bypass route:

Interpretation: Define rules for members of the network to find the corresponding Aweseed router when accessing the set destination address segment.

Continue to add the bypass route, the destination address is the upper device of the branch router. The addition is completed as shown in the following figure:

The two bypass routes added above are intended to be implemented separately:

1. The branch Aweseed can access the equipment under the first-level route of the headquarters;
2. The headquarters Aweseed can access the equipment under the branch level route.

4.5 Setting Static Routes

1. Log in to the primary router management page of the headquarters and set up static routes, as shown in the following figure:

1. Log in to the branch's primary router management page and set up static routes, as shown in the following figure:

Note: It is recommended to set static binding IP for Aweseed routers at both ends.

4.6 Open WAN Port Forwarding

[Remote Management on the router Turn on the WAN port forwarding function of the headquarters and branch Aweseed routers , so that Aweseed superior routing members can access the Aweseed networking.

4.7 Ping Test

Through ping measurement, the computer under the branch level route ping the server IP address under the headquarters level route.

5. Program Benefits

1. Without changing the headquarters network environment, according to cross-network transmission, cross-regional communication;
2. Reliability, single node failure does not affect other sub-point connections;
3. Unlimited concurrent number, with strong flexibility and scalability;
4. The deployment operation is simple, and the maintenance difficulty is greatly reduced.